How to Setup HP OfficeJet Pro 9015 All-in-One Printer Using HP Smart App –


About HP OfficeJet Pro 9015 AIO

The new comes with four-in-one functions. It can copy, scan and fax besides printing and also comes with a variety of other features. Compatible with dual-band Wi-Fi at 2.4 and 5GHz, the printing device also accommodates an Ethernet and USB connection. Additionally, equipped with an Automatic Duplex Document Feeder and easy slide-off glass, the printer is extremely easy to setup and use. Follow the below steps for HP OfficeJet Pro 9015 All-in-One Printer setup and installation.


  • The 2.65” color graphics display lets you perform urgent tasks instantly
  • With wireless capabilities, it also supports wired Ethernet and accommodates a USB port as well
  • The USB supports printing from several file types such as JPEG, TIFF, DPOF1.1, Exif 2.3, PNG and much more
  • Furthermore, it comes with an input paper tray capacity of 250 sheets along with an upper tray that handles about 100 sheets
  • Scan on both sides automatically with the Automatic Document Feeder or ADF
  • Supporting four individual ink cartridges – Black, Yellow, Magenta and Cyan, – the device also exhibits mobile printing capabilities
  • Additionally, it is also equipped with Wi-Fi Direct printing, Mopria Certified and HP Smart Wireless
  • The device comes with ISO print speeds of 22 ppm in black and 18 ppm in color

HP OfficeJet Pro 9015 All-in-One Printer Setup Using HP Smart

The HP OfficeJet Pro 9015 All-in-One Printer setup can also be accomplished using the HP Smart App

HP OfficeJet Pro 9015 All-in-One Printer Setup
HP OfficeJet Pro 9015 All-in-One Printer Setup

Unboxing the Printer

  • Cut the tapes across the cardboard box open and lay it on its side
  • From here, hold the top of the cover to pull the printer out of the compartment
  • Inside the box, you will find, besides the printer, a set of ink cartridges (KCMY), power cable, reference guide, instant ink subscription flyer, regulatory information and a poster for setup
  • Remove the tapes from on top of the printer and all other protective materials

Powering on

  • Insert the power cable into its slot behind the printer while plugging the other end into an electrical socket
  • Switch the main circuit on – the LCD in front of the control panel comes on
  • Follow the steps on the screen
  • Choose your language first, and then click on Confirm and thereafter, choose the country and click on Confirm

Installing Cartridges

  • The printer will then prompt you to install the cartridges
  • You need to open the cartridge access door, in order to install the print cartridges
  • Now, take cartridges that came along with the box and insert them one by one in the order as shown on the seats
  • When you push the cartridges in, you should hear a snap – indicating that it has been seated appropriately
  • Now, close the cartridge access door, and look for a successful message on the LCD
  • If the message indicates that the cartridges are inserted appropriately and are ready, click on Ok

Placing Paper

  • The next screen on the LCD asks you to insert plain A4 size papers
  • For this, open the input tray and stack some paper into it
  • Move the width adjuster to suit the width of the paper stack
  • Close the input tray and thereafter, pull the output tray out
  • Reach out to the control panel and click on Ok

HP Software Installation

  • The next screen on the LCD is the Get HP Software screen
  • A QR code is displayed alongside a message that asks you to go to

On the Android Phone

  • You can connect to the wireless network from your android mobile phone using HP Smart
  • Open up a standard browser on your smartphone and go to
  • Install the HP Smart app from this page -> click on Get the App button and then -> click Install -> finally, click on Open
  • To completely enable HP Smart, you must agree to the conditions by click on the check box and then tap Continue
  • The app starts searching and displays the Get started by adding a printer screen
  • You will see a Plus icon at the top -> click on it
  • Allow the app to search for printer devices around the area

Printer Not Found

  • If a message stating Printer Not found displays, click on the Set Up a new printer button
  • Click on Continue at the Search for Printers? Screen
  • A message displays asking if you wish to allow HP Smart to access the device’s location
  • Click on Allow to continue with the setup
  • You should now be able to see your printer on the screen -> click on it Wi-Fi Connection

  • Next you will get the Connect Printer to WiFi screen -> for this, you must enter the Wi-Fi password since the network name is discovered and already displayed
  • After keying in the Wi-Fi password, click on Continue
  • The app completes the four steps namely Printer Found, Preparing the Printer, Obtain an IP Address and FinishConnections
  • Once all the four steps are done, a Printer Connected to WiFi message is displayed on your mobile screen

Test Your Printing

  • Simply click on Continue to follow the guided set up -> thereafter, a message is visualized where all of HP’s Account benefits are provided
  • You get automatic warranty registration and software updates, while being able to print from anywhere and at any time
  • At the next step log in to your HP Account -> if you do not possess one, you may have to create it now
  • After that click on Next to allow the app to check on the Printer Status
  • Once all the steps are complete, you can also accomplish printing from other devices
  • From the final screen, the app will ask you to test your print – here, you just have to click on Print a Document

Check with our agents @ or call us @ +1-850-761-8950 for more information on the HP OfficeJet Pro 9015 All-in-One Printer Setup.